CLEANING THE MAIN CHARGER OF THE
PHOTOCONDUCTIVE DRUM
If black lines appear even after you have cleaned the document glass and automatic document feeder, use the charger
cleaner to clean the main charger that charges the photoconductive drum.
1
Open the front cover.
2
Release the toner collection container.
Press up the toner collection container release lever.
The toner collection container will fall forward as shown.
Gently support the container with your hands as you let it fall
forward as far as it will go.
3
Clean the main charger.
Gently pull the charger cleaner all the way up, and gently push
it in.
4
Push the toner collection container into
the machine.
Push the container in until it clicks into place.
To Next Page
Loading...
