3
Set the format.
l Scanning in Mono2
(1) Select the file type.
(2) Select the compression mode.
l Scanning in color/grayscale
(1)
Touch the indicated key to select [Color/Gray] mode.
When [Color/Gray] is highlighted, [Color/Gray] mode is
selected.
(2) Select the file type.
(3) Select the compression ratio.
• High compression results in a smaller file size,
however, the image quality is slightly degraded.
• When [High] is selected in the file format settings, the
compression ratio cannot be selected.
• The [Programmed] key does not appear in USB memory mode.
• When this screen is displayed, the setting screen of [B/W] mode initially appears.
• The format setting of [B/W] mode is the file format when the color mode is set to [Mono2].
• The format setting of [Color/Gray] mode is the file format when the color mode is set to [Full Color] or [Grayscale].
• The file type of [B/W] mode and the file type of [Color/Gray] mode are linked. The file type cannot be set separately
for each. (When [JPEG] is selected for [Color/Gray] mode, [TIFF] is automatically selected for [B/W] mode.)
To Next Page
Loading...
Need help?
General
