[Color Mode] key
Touch the [Color Mode] key to open the color mode setting screen for Scan to HDD.
The following settings can be selected for the scanning color when the [START] key is pressed.
When you have finished selecting the mode, touch the [OK] key.
Mode Scanning method
Auto
The machine detects whether the original is color or black and white and automatically selects full
color or black and white (grayscale) scanning.
Full Color
The original is scanned in full color. This mode is best for full color originals such as catalogues.
Even when the original is black and white, it is scanned as a full color original.
Grayscale The colors in the original are scanned in black and white as shades of gray (grayscale).
Mono 2 Colors in the original are scanned as black or white. This mode is best for text-only originals.
Scan to HDD/Color Mode
OK
Full Color
Auto
Grayscale
Mono2
Color Mode
To Next Page
Loading...
