Sharp MX-M564N

7-36
SYSTEM SETTINGS
Contents
Network Settings
*1 Depending on your machine specifications, only the items under "General Setting" will be displayed.
*2 This cannot be set on the machine. Set this in the system settings in the Web pages.
 Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-73
 600dpiX600dpi Scanning Mode for Document Feeder Disabled 7-73
 Quick Scan from Document Glass Enabled 7-73
l Auto Calibration 7-74
 Auto Calibration – 7-74
Item Factory default setting Page
n Network Settings
7-75
l General Setting*
1
7-75
 IPv4 Settings DHCP 7-75
 IPv6 Settings Disabled 7-75
 Enable TCP/IP Enabled 7-75
 Enable NetWare Disabled 7-75
 Enable NetBIOS Disabled 7-75
 Enable EtherTalk Disabled 7-75
 Reset the NIC – 7-75
 Ping Command – 7-75
l Connection Type Switching*
1
7-76
l Wireless Settings*
1
7-76
l NAS Setting*
2
7-77
Item Factory default setting Page