Sharp PA-3000 - Page 17

copel| + “ i
consll +
R
ACR
Micro backspace is useful for squeezing a longer word into a given
space and for fine adjustment of the carrier position for Manual
Corrections. It moves the carrier 1/60 inch to the left.
To Use Micro Backspace:
~ 1. Enter the following text: The gick brown fox
2. Position the carrier on "k".
3. Use the AUTO CORRECTION ( &) key to erase "K', "¢, and "i".
4. Hold down the CODE key and press the BACKSPACE ( + ) key.
5. Type "u".
6. Hold down the CODE key and press the BACKSPACE ( «— ) key.
7. Type "i". -
8. Hold down the CODE key and press the BACKSPACE ( «— ) key.
9. Type "¢".
10. Hold down the CODE key and press the BACKSPACE ( «+— ) key.
11. Type "k".
Result: The quick brown fox
12. Press the RELOC key.
13. Continue typing.
The Automatic Carrier Return mode is automatically selected when
you turn on the typewriter. When this mode is on, the carrier will
automatically return when a space or hyphen is entered within the
hot zone area. This is the area 8 spaces before the right margin.
A beep will sound to let you know you are in the hot zone area.
To Turn the Automatic Carrier Return Mode Off/On:
Hold down the CODE key and press the R (A-CR) key to turn this
mode off.
Hold down the CODE key and press the R (A-CR) key to turn this
mode on. At this time, a short beep sounds.
&ints to Remember
e Continue typing as the carrier returns. The typewriter will
remember the characters you type and automatically print them
on the next line.
e |f you want to type a space in the hot zone without returning the
carrier, hold down the CODE key and then press the SPACE
BAR. This is the Required Space.
o |f you want to type a hyphen in the hot zone without returning the
carrier, hold down the CODE key and then press the HYPHEN (-)
key. This is the Required Hyphen.