Sharp PG-LW2000 User Manual

16
Setting Up the Projector
Video Setup
If using this projector outside the U.S.A., please change setting to “0 IRE” in Video Setup. (See
page 42.)
Setting Up the Projector
For optimal image quality, position the projector perpendicular to the screen with the projector's
feet fl at and level. Doing so will eliminate the need for Keystone correction and provide the best
image quality. (See page 26.)
Standard Setup (Front Projection)
Place the projector at the required distance from the screen according to the desired picture
size. (See page 17.)
Indication of the Projection Image Size and Projection Distance
Example: 16:10 Signal Input (Normal Mode)
300" (762 cm)
200" (508 cm)
100" (254 cm)
40" (102 cm)
4'4"–5'3"
(1.3 m – 1.6 m)
10'11"–13'2"
(3.3 m – 4.0 m)
21'10"–26'4"
(6.7 m – 8.0 m)
32'9"–39'6"
(10.0 m – 12.0 m)
254"×159"
(646 cm × 404 cm)
170"
×
106"
(431 cm
×
269 cm)
85"×
53"
(215 cm
×
135 cm)
34"
×
21"
(86 cm
×
54 cm)
Picture Size
Projection
Distance
■

Sharp PG-LW2000 Specifications

General

Brand	Sharp
Model	PG-LW2000
Category	Projector
Language	English