Sharp PG-LX3500

Other manuals for Sharp PG-LX3500

Specification2 pages

Specifications4 pages

Questions and Answers:

E
Elizabeth MendozaAug 20, 2025
How to troubleshoot a Sharp PG-LX3500 that has no picture and no sound and does not start?
- S
  Shawn WilliamsAug 20, 2025
  If your Sharp Projector shows no picture and no sound, and doesn't start, try these steps: * Ensure the power cord is properly plugged into the wall outlet. * Verify that the input mode is correctly selected. * Confirm that external connected devices are powered on. * Check that all cables are correctly connected to the projector. * Replace the remote control battery. * Set the external output when connecting a notebook computer. * Install the lamp unit cover correctly.
P
Pamela PageAug 22, 2025
What to do if my Sharp Projector has sound but no picture?
- J
  John LeonAug 22, 2025
  If you're getting sound but no picture (or a dark picture) on your Sharp Projector, here's what to check: * Adjust the brightness setting, as it may be set to the minimum. * Make sure all cables are correctly connected to the projector. * Change the signal output setting on your computer.
M
martin85Aug 25, 2025
Why does the image flicker on my Sharp PG-LX3500 Projector?
- C
  Casey LopezAug 25, 2025
  If the image on your Sharp Projector is flickering, it could be due to: * Incorrectly connected cables. Ensure all cables are properly connected. * A faulty lamp. If the flickering occurs frequently, consider replacing the lamp.
W
Wanda MontgomeryAug 26, 2025
Why is my Sharp PG-LX3500 Projector remote control not working?
- M
  maciasgarrettAug 27, 2025
  If your Sharp Projector's remote control isn't working, try the following: * Point the remote control directly at the projector's remote control sensor. * Ensure you are within the remote control's operational distance from the projector. * Shield the sensor from direct sunlight or strong fluorescent light. * Verify that the batteries are correctly inserted or replace them with new ones.
R
Rebecca TaylorAug 28, 2025
How to fix faded or poor color on Sharp Projector?
- G
  Gina HernandezAug 28, 2025
  If you're getting a faded or poor color display on your Sharp Projector: * Adjust the “Color” and “Tint” settings in “Picture Mode” and lower the “BrilliantColorTM” value. * Check that the video input system is set correctly.
R
ryan20Aug 30, 2025
What to do if Sharp PG-LX3500 Projector lamp does not light up?
- M
  morgansandraAug 30, 2025
  If the lamp on your Sharp Projector does not light up even after you turn on the projector, and the lamp indicator is illuminating in red, replace the lamp.
A
Aaron ReedSep 1, 2025
Why is the picture blurred on my Sharp PG-LX3500?
- S
  sara09Sep 1, 2025
  If the picture on your Sharp Projector is blurred or noisy: * Adjust the focus. * Check the projection distance to ensure it's within the focus range. * Set up the projector at least one hour before using.
D
Donna GeorgeSep 3, 2025
Why is there ghosting on my Sharp PG-LX3500 Projector?
- J
  Julia DavisSep 3, 2025
  If you see ghosting (a double image) without the image appearing in 3D on your Sharp Projector, try the following: * Ensure that you are using 3D LCD shutter glasses. * Check that the shutters on the 3D LCD shutter glasses are working properly. * Check the settings of the projector. * Check whether a signal that is not supported is being input. * If connected to a computer for 3D playback, ensure a stereoscopically-enabled application is used. * Check for obstructions between the screen and the 3D LCD shutter glasses. * Check for nearby sources of high-intensity lighting. * Use only one projector at a time.
J
jamie55Sep 5, 2025
Why does my Sharp PG-LX3500 Projector have a dark or bluish image?
- M
  Meredith GonzalezSep 5, 2025
  If you're experiencing dark or bluish images on your Sharp Projector, check that the “Wall Color” setting is configured correctly.
B
benitezjohnnySep 7, 2025
Why is there no sound on my Sharp PG-LX3500 Projector?
- E
  Eric DavisSep 7, 2025
  If you see a picture but hear no sound from your Sharp Projector: * Ensure all cables are correctly connected to the projector. * Increase the volume, as it may be set to minimum. * Set the speaker to “On”, as it may be set to “Off”.