Sharp PN-C703B User Manual

14
E
Cable clamp
(affixing type)
Affixing point
Cable
The supplied cable clamps (afxing type) can be used to clamp the USB cable and cables connected to the back of the monitor.
Caution
• Attach the supplied cable clamps to a at surface. Do not attach over a vent.
• Remove any dust or dirt before attaching.
Binding Cables
Connecting the Power Cord
Caution
• Use only the power cord supplied with the monitor.
• When all connections are complete, connect the power
cord.
1. Plug the power cord (supplied) into the AC input terminal.
2. Plug the power cord (supplied) into the AC power outlet.
TIPS
• Be sure to clamp the power cord (supplied) using the
supplied cable clamp.
1
Power cord (Supplied)
For power
outlet
2
AC input terminal
Be sure to clamp the power cord (supplied) and the USB cable using the supplied cable clamp. When clamping the power cord,
take care not to stress the terminal of the power cord. Do not bend the power cord excessively.
The cable clamp also can be used to bundle cables (connected to the back of the monitor) with the USB cable.
Affixing point
Power cord (Supplied)
USB cable

Sharp PN-C703B Specifications

General

Brand	Sharp
Model	PN-C703B
Category	Monitor
Language	English