Sharp PN-C703B User Manual

32
E
The power LED is ashing.
When “TEMPERATURE” is displayed in the corner of the
screen.
• To prevent high-temperature-related problems,
“TEMPERATURE” is displayed on the screen when the
internal temperature of the monitor rises excessively.
• If the internal temperature rises further, the monitor
automatically enters standby mode. (The power LED
ashes green.)
• Remove the cause of the excessive temperature rise.
- If the monitor enters standby mode due to a rise in
temperature, to return to normal display, turn the power
switch off and then back on again. The monitor, however,
will enter standby mode again if the cause of the
temperature rise is not eliminated. (See page 8.)
- Check whether the monitor is placed at a location where
a quick rise in temperature is likely. Internal temperature
rises quickly if the vents on the monitor are blocked.
- Internal temperature rises quickly if dust accumulates
inside the monitor or around the vents. Remove dust if
possible. Ask SHARP dealer about removing internal dust.
Troubleshooting

Sharp PN-C703B Specifications

General

Brand	Sharp
Model	PN-C703B
Category	Monitor
Language	English