EasyManua.ls Logo

Sharp PN-H801 - Page 13

Sharp PN-H801
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
E
Connecting Peripheral Equipment
• ConnectwithacommerciallyavailableHDMIcertied
cable(ahigh-speedtypeisrecommended).Forthe
following,useahigh-speedHDMIcable:
-Whenconnectingadevicethatiscompatiblewith4K2K
output.
-Wheninputtinga1080pvideosignal
• WhenusingthesuppliedDisplayPort-HDMIconversion
cable,usetheHDMI1-3inputterminal.
• WhenusingtheaudioinputterminalwithHDMIinput,
usetheHDMI3inputterminalandsetAUDIOSELECTof
INPUTSELECTintheSETUPmenutoHDMI+ANALOG.
• Compatibleaudiosignals
-Type:LinearPCM(2ch),AAC,DolbyDigital
-Samplingfrequency:48kHz/44.1kHz/32kHz
•
UseanHDMIcableconnectorwiththefollowingdimensions:
Thickness: 1/2 inch (12 mm)
or less
5. PC D-sub input terminal
• WhenusingtheaudioinputterminalwiththePCD-sub
inputterminal,setAUDIOSELECTofINPUTSELECTin
theSETUPmenutoVIDEO+AUDIO.
• WhenusingthePCD-subinputterminal,spaceis
requiredbehindthemonitor.
6. USB port
• ConnectaUSBashdrivetotheUSBport.
• DonotconnectaUSBdeviceotherthanaUSBash
drive.
• TurnoffthepowerofthemonitorwhenremovingaUSB
ashdrive.
SupportedUSBashdrives
FileSystem FAT32
Capacity
Upto32GB
(maximumlesize2GB)
• DonotuseaUSBashdrivewithasecurityfunctionor
awriteprotectionfunction.
• UseaUSBashdrivewithashapethatcanbeinserted
intheUSBport.SomeUSBashdriveswithspecial
shapescannotbeinserted.DonotforciblyinsertaUSB
ashdrive.Thismaydamagetheconnectorandcause
failure.
7. Audio input terminal
• Thisisusedtoinputanalogaudiowhenvideoisshown
usingtheHDMI3inputterminalorthePCD-subinput
terminal.CheckthesettinginAUDIOSELECTofINPUT
SELECTintheSETUPmenu.
• Useanaudiocablewithoutresistance.
8. Headphone terminal
• Usecommerciallyavailableheadphones(ministereo
jack).
• Theoutputsoundvariesdependingontheinputmode.
• Thevolumecanbeadjustedusingthevolumeadjustment.
• Whenheadphonesareconnectedtotheheadphone
terminal,soundisnotoutputfromthemonitorspeakers.
9. Digital audio output (optical) terminal
• YoucanoutputMPEG2AAC/DolbyDigitalaudioformat
fromthemonitor.
• Usethefollowingforthedigitalaudiooutput(optical)
terminal.
Thickness: 1/2 inch (12 mm)
or less
10. CONTROL terminal (RS-232C input terminal)
• ThemonitorcanbeconnectedtoaPCusingtheRS-
232Cconversioncable(supplied)andacommercially
availableRS-232straightcabletocontrolthemonitor
fromthePC.
11. LAN terminal
• YoucancontrolthemonitorfromaPConanetworkby
connectingacommerciallyavailableLANcablebetween
thisterminalandanetwork.

Other manuals for Sharp PN-H801

Related product manuals