Sharp PN-H801 - Connecting the Power Cord; Removing the Handles

14
E
Connecting the Power Cord
Caution
• Useonlythepowercordsuppliedwiththemonitor.
1.Turnoffthemainpowerswitch.
2.Plugthepowercord(supplied)intotheACinputterminal.
3.Plugthepowercord(supplied)intotheACpoweroutlet.
2
Power cord (Supplied)
AC input terminal
Main power switch
1
For power
outlet
3
Removing the Handles
Thehandlescanberemoved.
Handle
Handle screws
Caution
• Theremovablehandlesandhandlescrewsareforusewiththismonitor.Donotusethemforanyotherdevices.
• Toattachhandles,besuretousethehandlesandhandlescrewswhichwereremovedfromthismonitor.
• Besurethehandlesareattachedsecurely.
TIPS
• Wheninstallingthemonitorinlandscapeorientation,besuretoclampthepowercord(supplied)ontothecableclamp
attachmentusingthesuppliedcableclamp(forpowercord).Whenclampingthepowercord,takecarenottostressthe
terminalofthepowercord.Donotbendthepowercordexcessively.Forinformationonhowtoattachthecableclamp,see
page15.
Powercord(Supplied)
Cableclamp(forpowercord)