Sharp PN-H801 - Specifications

39
E
Specications
n
Product Specications
Model PN-H801
LCD component
80" Class [80-1/2 inch (204.4cm) diagonal] TFT LCD
Max. resolution (pixels)
3840 x 2160
Max. colors
Approx. 1.06 billion colors
Pixel pitch
0.464 mm (H) × 0.464 mm (V)
Viewing angle
176° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm)
70-1/8 x 39-7/16 (1781.76 x 1002.24)
Computer input signal
HDMI, Analog RGB (0.7 Vp-p) [75 Ω]
Sync signal
Horizontal/vertical separate (TTL: positive/negative)
Plug and play
VESA DDC2B
Input terminals
Video HDMI x 4
-
HDCP1.4 compatible (HDMI1 - HDMI3)
HDCP2.2 compatible (HDMI4)
-
ARC compatible (HDMI1)
-
MHL compatible (HDMI4)
Mini D-sub 15 pin, 3 rows x 1
Audio
3.5 mm mini stereo jack x 1
Serial (RS-232C)
3.5 mm mini stereo jack x 1
USB ash drive x 1
Output terminals Audio
Digital audio output (optical) x 1
3.5 mm mini stereo jack x 1
LAN terminal 10 BASE-T/100 BASE-TX
Speaker output 10 W + 10 W
Internal memory 400 MB
Power requirement AC 100 - 240 V, 5.6 A, 50/60 Hz
Operating temperature
*
1
32°F to 104°F (0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power consumption (Maximum / input signal
waiting mode / standby mode
*
2
)
490 W/27 W/0.5 W
Dimensions (excluding protrusions) inch (mm)
Approx. 71-1/2 (W) x 4-1/2 (D) x 41-1/8 (H) (1816 x 114 x 1045)
Weight lbs. (kg)
Approx. 119.0 (54)
*1 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases,
please check the temperature condition specied by the optional equipments.
*2 When POWER SAVE MODE is set to ON. When POWER SAVE MODE is set to OFF: 27 W.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement
without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from
these values in individual units.