Sharp PN-H801 - Control Command Table

33
E
Control command table
How to read the command table
Command: Commandeld(Seepage31.)
Direction: W Whenthe“Parameter”issetintheparametereld(seepage31),thecommandfunctionsasdescribed
under“Control/ResponseContents”.
 R Thereturnedvalueindicatedunder“Reply”canbeobtainedbysetting“????”or“?
” in the
parametereld(seepage31).
Parameter: Parametereld(Seepage31.)
Reply: Response(Returnedvalue)
TIPS
• Instandbymode,theonlycommandthatisusedisPOWERCONTROL.
• WhenPOWERSAVEMODEisON,controlviaLANisnotpossibleinstandbymode.
Power control/Input mode selection
Function Command Direction Parameter Reply Control/Response contents
POWERCONTROL POWR W 0 Switchestostandbymode.
1 Returnsfromstandbymode.
R 0 Standbymode
1 Normalmode
2 Inputsignalwaitingmode
INPUTMODESELECTION ITGD W 0 Togglechangeforinputmode.
IAVD WR 1 1 HDMI1
2 2 HDMI2
3 3 HDMI3
4 4 HDMI4
5 5 D-SUB
6 6 MULTIMEDIA(USBport/Internalmemory)
PICTURE menu
Function
Command Direction
Parameter Reply Control/Response contents
PICTUREMODE AVMD W 0 Togglechangeforinputmode.
1 AV
2 MOVIE
3 GAME
6 VIVID
7 PC
9 sRGB
11 PHOTO
20 AdobeRGBSIM.
R 1 AV
2 MOVIE
3 GAME
6 VIVID
7 PC
9 sRGB
11 PHOTO
20 AdobeRGBSIM.
BRIGHT VLMP WR -16-16 -16-16
CONTRAST CONT WR 0-40 0-40
BLACKLEVEL BLVL WR -30-30 -30-30
TINT TINT WR -30-30 -30-30
COLORS COLR WR -30-30 -30-30
SHARPNESS SHRP WR 0-20 0-20
Controlling the Monitor with a PC (RS-232C)