Sharp PN-LC862 Manual

8
E
Caution
• Turn on the monitor first before turning on the computer or
playback device.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.
Turning on the main power
Main power switchMain power switch
PN-LC652
When you turn on the main power, the monitor enters standby
state.
Off mode, when main power is off.
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
•
For a complete electrical disconnection, pull out the main plug.
Turning power on
1. Press the POWER button.
Power LED
POWER button
Status Status of the monitor
Blue lit
Power on
Sleep state (Backlight off)
Orange lit Power off (Standby state*
1
)
Orange flashing (at approx. 2
seconds interval)
Power off (Standby state*
2
)
Orange flashing (at approx. 1
second interval)
Input signal waiting state
*1 When “Power save mode” is set to on.
Standby mode when “Wake On LAN” is set to off.
Networked standby mode when “Wake On LAN” is set to on.
Networked standby mode allows the monitor to be turned on
via network (LAN, RS-232C, and HDMI CEC).
*2 When “Power save mode” is set to off.
Turning Power On/Off

Sharp PN-LC862 Specifications

General

Brand	Sharp
Model	PN-LC862
Category	Monitor
Language	English