Sharp PN-V550 - Multiple Monitor Connection

13
E
Connecting Peripheral Equipment
Multiple monitor connection
The monitors can be aligned and used as a large screen.
[Example]
Second monitor
Secondary
(Expansion unit)
ID No.: 2
Third monitor
Secondary
(Expansion unit)
ID No.: 3
First monitor
Primary
(Main unit)
ID No.: 1
Fourth monitor
Secondary
(Expansion unit)
ID No.: 4
Remote control sensor box
(Supplied with the PN-ZR01A (optional))
TIPS
• Connect the RS-232 cables in order, starting with the rst
monitor (primary monitor). If monitors are connected in a
different order they may not be operable.
• Always install the remote control sensor box on the primary
monitor.
n
Connection with video cable
Connection with DVI cable
May vary depending on the system being used.
If using the DVI-I input terminal/DVI-D output terminal, up to 5
monitors can be connected in a daisy chain.
shows the signal
flow
First monitor Second monitor
Digital signal (DVI) cables
(commercially available)
To PC digital RGB output terminal
DVI-I input
terminal
DVI-D
output
terminal
DVI-I input
terminal
Connection with DisplayPort cable
Up to 25 monitors (4 monitors when supporting HDCP) can be
connected in a daisy chain.
shows the signal
flow
First monitor Second monitor
DisplayPort cables
(commercially available)
To DisplayPort output terminal
DisplayPort
input terminal
DisplayPort
input terminal
DisplayPort
output
terminal