27
E
n
PICTURE
You can move the menu screen display position each time
DISPLAY
is pressed.
BRIGHT
Adjusts the backlight brightness. (In PIP mode, the main side setting is reected in the image.)
CONTRAST
Adjusts the difference between the bright and dark portions of the image.
BLACK LEVEL
Adjusts the entire brightness of the video signals.
TINT
Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta.
COLORS
Adjusts the color intensity.
SHARPNESS
Adjusts the sharpness of the image.
COLOR ADJUSTMENT
COLOR MODE
Changes the color mode on the screen. The color mode on the screen can also be changed using a remote control unit. (See
page 22.)
* sRGB is PC input only. See page 22 for details.
(In PIP mode, the main side setting is reected in the image.)
WHITE BALANCE
THRU ................................. Displays the input signal level as is. (for PC input only)
PRESET ............................. Selects the color temperature using PRESET.
USER ................................. Used for adjusting R-/G-/B-CONTRAST and R-/G-/B-OFFSET respectively.
(In PIP mode, the main side setting is reected in the image. * The R-/G-/B-OFFSET settings are not included.)
ADJUST UNIFORMITY ...... Used for adjusting UNIFORMITY, R-/G-/B-CONTRAST, R-/G-/B-OFFSET, and BRIGHTNESS
VALUE respectively.
(In PIP mode, the main side setting is reected in the image. * The R-/G-/B-OFFSET settings are not included.)
PRESET
Selects the color temperature when the WHITE BALANCE is set to PRESET.
The setting values are shown for reference. The color temperature of the screen varies over time. This function is not
intended to keep the color temperature constant.
USER
Adjusts each item when the WHITE BALANCE is set to USER.
R-CONTRAST .................... Adjusts bright-toned red component.
G-CONTRAST ................... Adjusts bright-toned green component.
B-CONTRAST .................... Adjusts bright-toned blue component.
R-OFFSET ......................... Adjusts dark-toned red component.
G-OFFSET ......................... Adjusts dark-toned green component.
B-OFFSET ......................... Adjusts dark-toned blue component.
ADJUST UNIFORMITY
Adjusts each item when the WHITE BALANCE is set to ADJUST UNIFORMITY.
UNIFORMITY ..................... Sets the discoloration correction level. (See page 28.)
R-CONTRAST .................... Adjusts bright-toned red component.
G-CONTRAST ................... Adjusts bright-toned green component.
B-CONTRAST .................... Adjusts bright-toned blue component.
R-OFFSET ......................... Adjusts dark-toned red component.
G-OFFSET ......................... Adjusts dark-toned green component.
B-OFFSET ......................... Adjusts dark-toned blue component.
BRIGHTNESS VALUE ....... Adjusts the screen brightness.
COPY TO USER
Copies the value of white set for PRESET to the USER setting.
Select “ON” and then press
.
(In the case other than white, color tone may differ from the PRESET.)
Menu Items
To Next Page
Loading...
