Sharp PRO-60X5FD - Page 19

PRO-60/70X5FD
4 – 8
3. Removing of Connectors
1. Disconnect the following connectors from the MAIN Unit. (LW, PD, PL)
2. Disconnect the following connectors from the POWER Unit. (PD, LA)
3. Disconnect the following connectors from the LCD CONTROL Unit. (LB, LW, PL)
4. Disconnect the following connectors from the LED DRIVE Unit. (LA, LB)
LED DRIVE Unit
LCD CONTROL Unit
POWER Unit
MAIN Unit
[LB]
[LA]
[PD]
[LW]
[LA]
[LW]
[PL]
[LB]
[PL]
LED DRIVE Unit
POWER Unit
LCD CONTROL Unit
MAIN Unit
[PD]