Sharp R-321CAF - Multiple Sequence Cooking; Programming Multiple Cooking Stages; Example: Multi-Sequence Cooking Procedure

18
<Multiple Sequence Cooking>
Preheating, Microwave Cooking, Convection Cooking, Grill Cooking and COMBI Cooking can be
programmed to up to 4 manual cooking sequences, switching from one variable power setting to another.
Note that MICROWAVE WATTAGE must be entered first when programming sequence cooking.
* Suppose you want to cook for 10 minutes at 880W microwave power, cook for 5 minutes at 1100W and
cook with Grill for 20 minutes.
Step Procedure Pad Order Display
1
Select microwave cooking and desired
wattage level by pressing the MICRO-
WAVE WATTAGE pad
(
for 880W
microwave power press three times
)
.
× 3
2
Press the START/+30SEC. pad.
3
Enter desired cooking time.
4
For second sequence, select microwave
cooking and wattage level
(
for 1100W press the MICROWAVE
WATTAGE pad once
)
× 1
5
Press the START/+30SEC. pad.
6
Enter desired cooking time for the
second sequence.
7
For third sequence, press the GRILL
pad.
8
Enter desired cooking time.
Continued on next page.
R-321CAF.indb 18 2023/10/26 14:39:49