Sharp R-322STM User Manual

GB-13
WEIGHT DEFROST FUNCTION
OTHER CONVENIENT FUNCTIONS
WEIGHT DEFROST
The microwave oven is pre-programmed with a timer and power levels so that foods such as pork, beef and chicken can be easily defrosted.
The weight range for this is from 100g – 2000g in 100g steps.
Follow the example below for guidance on how to operate this function.
Example: To defrost a meat joint weighing 1.2kg using WEIGHT DEFROST.
Place the meat in a  an dish or alternatively on a microwave oven defrost rack on the turntable.
1. Press the WEIGHT DEFROST button
once.
2. Enter the desired weight by rotating the
ENTRY dial until the display shows:
3. Press the START/ +30sec./ENTER button
to start defrosting.
(The display will count down through
defrosting time)
NOTE:
• Frozen foods are defrosted from -18°C.
• Before freezing foods, ensure food is fresh and of good quality.
• If necessary, shield small areas of meat or poultry with  at pieces of aluminium foil. This will prevent the areas from becoming warm
during defrosting. Ensure the foil does not touch the oven walls.
• Food weight should be rounded up to the nearest 100g, for example, 650g to 700g.
• After defrosting an audible signal will sound  ve times and the LED will then display time of day, if the clock has been set. If the clock has
not been set, the display will only show "0:00" when defrosting is complete.
1. SEQUENCE COOKING
This function allows you to cook using up to 2 di erent stages which can include manual cooking times or time defrost as well as a weight
defrost function. Once programmed there is no need to interfere with the cooking operation as the oven will automatically move onto the
next stage. An audible signal will sound once after the  rst stage. If the defrost function is needed within sequence cooking - please note
that this should always be the  rst stage of sequence cooking.
NOTE: AUTO MENU cannot be set as one of the multiple sequences.
Example: If you want to cook food for 20 minutes on P100 microwave power and then for 5 minutes with P80 microwave power. The
steps are as follows:
- 1. Press the MICRO. POWER button, P100 will appear in the LED display.
- 2. Press the START/+30sec./ENTER button once to con rm the setting.
- 3. Enter the cooking time by rotating the ENTRY dial until the display shows “20:00” minutes.
- 4. Press the MICRO. POWER button, P100 will appear in the LED display.
- 5. Press the MICRO. POWER button twice or rotate the ENTRY dial to select the microwave power to P80.
- 6. Press the START/+30sec./ENTER button once more to con rm the setting.
- 7. Enter the cooking time by rotating the ENTRY dial until the display shows “5:00” minutes.
- 8. Press the START/ +30sec./ENTER button to start cooking.
2. +30sec FUNCTION (Auto minute)
Direct start
You can directly start cooking on P100 microwave power level for 30 seconds by pressing the START/ +30sec./ENTER button. The cooking
process will start immediately and each time the button is pressed this will increase the cooking time by 30 sec.
NOTE: The cooking time may be extended to a maximum of 95 minutes.
3. CHILD LOCK:
Use to prevent unsupervised operation of the oven by children.
a. To set the CHILD LOCK:
In the stand-by mode, press STOP/CLEAR button for 3 seconds. There will be a long beep denoting entering the children-lock state and the
indicator will illuminate together with the current clock time. If the clock has not been set the display status will be as follows:
b. To cancel the CHILD LOCK:
In the stand-by mode, press STOP/CLEAR button for 3 seconds. There will be a long "beep" denoting that the lock is released.

Sharp R-322STM Specifications

General

Brand	Sharp
Model	R-322STM
Category	Microwave Oven
Language	English