Page 18 SHARP SL-C1000/3000/3100
///TRIsoft OHG SL-C1000/3000/3100 Quickstart
The Zaurus USB port
The SL-C1000/SL-C3000/SL-C3100 are the first Zauris with a combined USB client /
host port. Not only host devices (like PCs) can be connected with the Zaurus, also clients
(like USB-sticks, cameras, keyboards) can be used.
The connector on the Zaurus side is a Mini-AB receptacle to be used with Mini-A (Zaurus
working as host) or Mini-B (Zaurus is client) plugs following the USB-OTG (On The Go)
specification.
Access as USB-Mass Storage (Zaurus is client)
The SL-C1000/SL-C3000/SL-C3100 provides a special setting for the PC-Link. you can
choose between “PC-Link Setting” and “Storage” Mode. Choosing “Storage” it is
possible to grant access to a CF / SD card or the integrated harddisk. The Zaurus
communicates to the PC as a USB mass storage device like a USB-stick or a digital
camera. With this feature it is easy to transfer files between a card inserted in the Zaurus
and a PC without installing any driver first.
Note: While changing the settings in “PC-Link Setting” the USB cable should not be
connected to the Zaurus. Otherwise you will see the error message “USB-Alert”. In this
case please pull the USB cable and try it again.
To Next Page
Loading...
Need help?
General
