Page 32 SHARP SL-C1000/3000/3100
///TRIsoft OHG SL-C1000/3000/3100 Quickstart
Go to the third page of the service menu.
Choose the option “BACKUP RESTORE
MENU” and press the OK key.
Now you should see the menu as in the
right picture (options 4, 8 and 10 are
available on the SL-C3000/3100 only):
Note for SL-C3000: With option 4 you may
create a backup of the harddisk. Let’s say
it again: It’s useless, you won’t need it !
Keep your hands off option 10 “HDD 00
Clear”. That’s a really bad idea because
you would erase the harddrive and may
use your Zaurus as a beautyful doorstop.
During the backup a green progress bar
will show up. If the backup process is
complete, press “Cancel” to get back to the
menu screen.
The created NAND backup will have the
filename systc100.dbk for the SL-C1000,
systc300.dbk for the SL-C3000 or systc310.dbk for the SL-C3100.
To Next Page
Loading...
Need help?
General
