8
Make sure the oven is properly installed and plugged into the electrical outlet.
NOTE : If “PL-0” is selected, the oven will work with the fan but no power. You can use this level to remove odors.
OPERATIONS AND FUNCTIONS
This section includes useful information about oven operation.
1. Plug power supply cord into a standard 3-pronged 14.7 Amps 120V AC 60Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Close the door. Make sure that it is firmly closed.
4. The oven light is on when the microwave oven is operating.
5. The oven door can be opened at any time during operation by pushing the door open button of control panel.
The oven will automatically stop.
6. Each time a pad is pressed, a BEEP will sound to acknowledge the press.
7. The oven automatically cooks on full power unless set to a lower power level.
8. The display will show “ : 0” when the oven CLOCK is not set.
9. Time clock returns to the present time when the cooking time ends.
10. When the STOP/CLEAR pad is pressed during the oven operation, the oven stops cooking and all information retained.
To erase all information(except the present time), press the STOP/CLEAR pad once more. If the oven door is opened
during the oven operation, all information is retained.
11. If the START pad is pressed and the oven does not operate, check the area between the door and door seal for
obstructions and make sure the door is closed securely. The oven will not start cooking until the door is completely
closed or the program has been reset.
TO SET POWER LEVEL
• The power-level is set by pressing the Power Level pad and number pad. If you wish to use a different power level, press
the POWER LEVEL pad before pressing START pad. Enter the power level desired by pressing the appropriate number
pad. The chart shows the display, the power level and the percentage of power.
PRESS POWER PAD AND NUMBER POWER LEVEL (DISPLAY) APPROXIMATE PERCENTAGE OF POWER
POWER LEVEL + 1 + 0 PL10 100%
POWER LEVEL + 9 PL-9 90%
POWER LEVEL + 8 PL-8 80%
POWER LEVEL + 7 PL-7 70%
POWER LEVEL + 6 PL-6 60%
POWER LEVEL + 5 PL-5 50%
POWER LEVEL + 4 PL-4 40%
POWER LEVEL + 3 PL-3 30%
POWER LEVEL + 2 PL-2 20%
POWER LEVEL + 1 PL-1 10%
POWER LEVEL + 0 PL-0 0%
To Next Page
Loading...
Need help?
General
Weight and Dimensions
