Red indicator: In STANDBY mode.
Green indicator: In AUX mode.
Orange indicator: In Optical mode.
Blue indicator: In Bluetooth mode.
White indicator: In HDMI ARC mode.
Adjust the Volume
Press the + / – buttons on the unit or press the VOL+ / VOL- buttons on the remote control to adjust the volume.
If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE button again or press the VOL+ /
VOL- buttons on the unit or on the remote control to resume normal listening.
While adjusting the volume, the status indicator flashes quickly. While the volume level reaches its maximum level, if you press the
VOL+
button again, the status indicator flashes once.
While the volume level reaches its minimum level, if you press the VOL- button again, the status indicator flashes once.
Select Equaliser (EQ) Effect
While playing, press the NEWS or MOVIE or MUSIC buttons on the remote control to select between preset equalisers: Movie
(recommended for viewing movies), Music (recommended for listening to music), NEWS (recommended for listening to NEWS).
AUX/OPTICAL/HDMI ARC
1. Ensure that the unit is connected to the TV or audio device.
2. While in ON mode, press the SOURCE button on the unit repeatedly or press the AUX, OPTICAL, HDMI ARC buttons on the remote
control to select the desired mode.
3. Operate your audio device directly for playback features.
4. Press the VOL +/ button to adjust the volume to your desired level. TIP: While in HDMI ARC/OPTICAL mode, if there’s no sound
output from the unit and the HDMI ARC/OPTICAL lights flashes quickly, you may need to activate PCM signal output on your source
device (eg. TV, DVD or Blu-ray player).
Bluetooth Operation
Pair Bluetooth-enabled Devices
The first time you connect your Bluetooth device to this player, you need to pair your device to this player.
NOTE:
The operational range between this player and a Bluetooth device is approximately 8 meters (without any object between the
Bluetooth device and the unit).
Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
Compatibility with all Bluetooth devices is not guaranteed.
Any obstacle between this unit and a Bluetooth device can reduce the operational range.
If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode automatically.
1. While in ON mode, press the (Bluetooth) button on the remote control or on the unit to select Bluetooth mode. The Blue indicator will
light flash.
2. Activate your Bluetooth device and select the search mode. “HTSBW160” will appear on your Bluetooth device list.
If you cannot find the unit, press and hold the ” ” button on the remote control to be searchable. After the “Pairing”
voice prompt and the Blue indicator will flash rapidly.
3. Select “HT-SBW160” in the pairing list. After the “Paired” voice prompt, the system is successfully connected and the Blue indicator
will light up solidly.
4. Begin playing music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can:
Switch to another function on the unit.
Disable the Bluetooth function on your device.The device is successfully disconnected from the unit after the “Disconnected” voice
prompt.
Press and hold the “ ” button on the remote control.
TIPS:
Enter “0000” for the password if necessary.
If no other Bluetooth device pairs with this player in 2 minutes, the
player will reconnect to the previous connection.
The player will also be disconnected when your device is moved beyond the operational range.
If you want to reconnect your device to this player, place it within the operational range.
If the device is moved beyond the operational range, when it is brought back, please check if the device is still connected to the
player.
To Next Page
Loading...
