EasyManuals Logo

Sharp SuperSteam Plus SSC3088AS User Manual

Sharp SuperSteam Plus SSC3088AS
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
SSC3088AS
21
Operation of parts in different cooking methods
[1]When powered on
When oven is first plugged into AC
If the dampers’ vents are not in their proper locations, damper motors’ for intake, exhaust and SH rotate for a maximum 10~12 seconds
until all three damper SW are in OFF.
[2]Automatic
[3]Manual
SH heater (upper: 750W)
SH heater (middle: 600W)
SH heater (lower: 400W)
Engine heater (1350W)
Sirocco motor (left)
*1
Sirocco motor (right)
*1
DC fan motor (door)
*1
D motor (intake)
Damper opened
D motor (exhaust)
Damper opened
D motor (SH)
Damper opened
Pump motor
SH heater (upper: 750W)
*3 *3 - The heater is turned ON or OFF in accordance with temperature setting
SH heater (middle: 600W)
SH heater (lower: 400W)
Engine heater (1350W)
Circulation motor
*4 - 70% working
Sirocco motor (left)
*1
Sirocco motor (right)
*1
DC fan motor (door)
*1
D motor (intake)
Damper opened
D motor (exhaust)
Damper opened
D motor (SH)
Damper opened
Pump motor
*4
*1 - When cooking is finished
If the door is closed and the temperature is high,
fan cooling operation is controlled by oven thermistor.
If the door is opened, cooling is controlled by amount of operation time.
*1-When cooking is finished
If the door is closed and the temperature is high, it will rotate until the
temperature decreases to a certain degree.
If the door is opened, it will rotate for up to five minutes.
Circulation motor
Fan motor
*2
Fan motor
*2 - After cooking is finished, fan rotates at about 1,500 rpm.
The fan operation time varies with the operation time.
Oven warm-up
Start
End
gniwahT
SH HEATER (TOP:750W)
45sec. BEFORE FINISH : ON
SH HEATER (MID:600W)
45sec. BEFORE FINISH : ON
SH HEATER (LOW:400W)
45sec. BEFORE FINISH : ON
ENGINE HEATER (1350W) *4
1min. BEFORE FINISH : OFF
SIROCCO MOTOR (IN : LEFT)
*1
SIROCCO MOTOR (OUT : RIGHT)
*1
SIROCCO MOTOR (DOOR : FRONT)
*1
DAMPER MOTOR (IN : LEFT) CLOSE
OPEN
DAMPER MOTOR (OUT : RIGHT) CLOSE
DAMPER MOTOR (SH : REAR) OPEN
*8
PUMP MOTOR
*6
*4 START10'00"
E HEATER 10'00"
15'00"
15'00"
CYCLE MOTOR
*5
*5 45sec. BEFORE FINISH or AFTER FINISH
DOOR CLOSE : 70% (CCW); DOOR OPEN : 20% (CCW)
100%
*8- AFTER FINISH: OPEN
*6-MOTOR ON/OFF BY WL SENSOR
FAN MOTOR
*2 *2-COOLING AFTER FINISH : ABOUT 1500 R.P.M. for 10 MINUTES
67%
75%
STEAM or
STEAM REFRESH
45sec
before finish
10'00"
15'00"

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp SuperSteam Plus SSC3088AS and is the answer not in the manual?

Sharp SuperSteam Plus SSC3088AS Specifications

General IconGeneral
BrandSharp
ModelSuperSteam Plus SSC3088AS
CategoryOven
LanguageEnglish

Related product manuals