Sharp SX8800H - Disassembly Procedures; Disassembly Safety Precautions

Sy rot5 1010)
© DISASSEMBLY
Caution on Disassembly (Al)x!
Follow the below-mentioned notes when disassembling the #3 xl2mm
unit and reassembling it, to keep its safety and excellent
performance: nx
1. Be sure to remove the power supply plug from the wall 93x8mm
outlet before starting to disassemble the unit. '
2. Take off nylon bands or wire holders where they need be Bi
removed when disassembling the unit. After servicing (AIYX]
the unit, be sure to rearrange the leads where they were 23 xlazmm
before disassembling.
STEP REMOVAL
1 Cabinet
PROCEDURE
= ~ @3x 8 mm
(Bx 2@ (Al)x4
g3x6mm 23x 8mm
Bottom Plate SGREW Letsteraie Sin 0:9 ice
FrontPanel | jo Figure 4-1
a4 Meter | 4 cia cecceceeeees (CI)x2
23x6mm
Main PWB
Front Panel
Level Meter
PWB
(DI)xl
23x8mm
(Cl)x2
23x8mm @3x8mm
Figure 4-2
(E2)x3
(El) x2
2@3x8mm
x 4
Nf
(El)x4
23 xl6mm eR xl
ox et
(El)x2 V4
ee ; (El)x4
x
——————
23x8mm
Main PWB
(El) xl
23x6mm
(El)x3
23 x8mm
Figure 4-3