EN
If the radio reception is poor:
• Make sure that you have fully extended the tele-
scopic aerial (preferably vertically).
• Rescan for radio stations, see sections ‘Scanning
for DAB stations’ and/or ‘Tune to an FM station’ as
appropriate.
• Try moving your radio to another location to see if
the reception improves.
• Check that you do not have other electrical
equipment close to your radio. This may cause
interference.
If you are unable to pair with a Bluetooth device:
• Check that you are in Bluetooth mode.
• Ensure that you are within 10 metres of the radio
for Bluetooth functionality.
• Move the radio and Bluetooth device away from
other Bluetooth devices/electrical equipment.
• If possible, turn o other nearby Bluetooth devices
or disable their Bluetooth functionality.
If the function buttons do not respond:
• Check that the USB cable is connected to the back
of your radio. Short press
. If you are using
batteries, they may need to be replaced.
• Factory reset the device.
Note: All your settings, including the radio station list,
connected Bluetooth devices and any presets will be
deleted when a factory reset is carried out.
To Next Page
Loading...
Need help?
General
