20
<Medium>, and <Low>.
Display language
To change the display language, long press
. Use
to scroll and select <System> /
<Language>. Use
to scroll and select your
preferred language. There are 7 options available:
English, French, German, Italian, Spanish, Polish, and
Netherlands. An asterisk (*) will be displayed next to
the current language setting.
Other information
Software version
To check the software version of your radio, long
press
. Use to scroll and select
<System> / <SW Version>. The software version will
be displayed.
Factory reset
You can reset your radio to restore it to the original
factory settings.
Note: If you reset your radio, your stored presets will
be deleted and any connected Bluetooth device will
be unpaired.
Long press
. Use to scroll and select
<System> / <Factory reset>. <Factory Reset? <No>
Yes> will be displayed. Use
to scroll and
select <Yes>. <Restarting…> will be displayed. After
a few seconds, the display will change to <SHARP
sharpconsumer.eu> and will then go to standby
mode.
Troubleshooting
If there is no sound or power:
• Adjust the volume.
• Check that the USB cable is connected and that the
radio is not in standby mode.
• If the product is powered using batteries, check if
they need to be replaced. Please use good quality
AA batteries.
To Next Page
Loading...
Need help?
General
