EN-14
WATER TANK MAIN BODY
CARE INDEX
FILTER
MAINTENANCE LAMP
CARE AND MAINTENANCE
2
5
4
9
6
3
1
8
7
Place Page
1 Main Body 14
2 Water Tank 14
3 Humidifying Filter / Humidifying Tray 15
4 Sensors 16
5 HEPA Filter / Deodorizing Filter 16
6
Back Panel with Pre-Filter
(Only UA-KIL60E)
16
Back Panel (Only UA-KIL80E)
7 Dust Box (Only UA-KIL80E) 17
8 Pre-Filter (Only UA-KIL80E) 18
9 Plasmacluster Ion Generating Unit 19
Rinse the inside
with water.
Wipe with a dry,
soft cloth.
When the cumulative operation period or the water
containing period is more than approximately 720
hours, the Filter Maintenance Lamp will turn on.
• The Lamp is off when there is no water fi lled.
(Only UA-KIL80E)
• It will not calculate the time when the product is
unplugged.
• 30 days × 24 hours = 720 hours
This is a reminder to perform the maintenance
described Humidifying Filter and Tray, Main Body,
Back Panel, and Sensors.
After performing maintenance, reset the Filter
Maintenance Lamp.
RESET
Touch for
3 sec.
Always be sure to remove the
power plug from the wall outlet.
NOTE
How to clean hard to remove dirt.
Tank Cap Toothbrush
Clean the inside of the
Water Tank with a soft
sponge and the Tank
Cap with a cotton
swab or toothbrush.
To Next Page
Loading...
