E-8
OPERATION
CLEAN AIR
START
• Select the desired fan speed.
• Unless the power cord has been unplugged,
the operation starts in the previous mode it
was operated in.
STOP
Releases high-density Plasmacluster ions and discharges strong air fl ow for 60 minutes.
CLEAN ION SHOWER
START
• If Plasmacluster Ion is OFF, Plasmacluster Ion will not be
released.
• When the operation fi nishes, the unit will return to the prior
operation mode.
It is able to change the other mode or turn off during this
mode.
NOTE
AUTO SLEEP MED MAX
FAN SPEED
SLEEP
• The unit will operate very quietly, and the fan speed
is automatically switched depending on the amount of
impurities in the air.
It will darken the brightness of the following lamp.
CATCH Lamp / UV Light Lamp / GLUE SHEET Lamp / UV
Light of the backside.
DUST AND ODOUR / PLASMACLUSTER SIGN go off
automatically.
Even though the indicator is off , Plasmacluster Ion is
released into air unless Plasmacluster Ion is turned off by
NOTE
AUTO
• The fan speed is automatically switched depending on the
amount of impurities in the air. The sensors detect impurities
for efficient air purfication.
To Next Page
Loading...
Need help?
General
