E-17
ENGLISH
Power supply 220-240V 50-60Hz
Fan
Speed
Operation
Fan Speed MAX MED SLEEP
*1
Rated Power (W) 51 17 4.0~6.0
Airfl ow (m
3
/hr) 306 186 48~90
Recommended Room Size(m
2
)
*2
~40
High density Plasmacluster ion recommended room size
(m
2
)
*3
~23
Cord Length (m) 2.0
Dimensions (mm) 394(W)x281(D)x540(H)
Weight (kg) 6.1
Standby Power
In order to operate the electrical circuits while the power plug is inserted in the
wall outlet, this product consumes about 1.0W of standby power.
For energy saving, unplug the power cord when the unit is not in use.
SYMPTOM REMEDY (not a malfunction)
GLUE SHEET Lamp is fl ashing
It’s replacement timing of glue sheet.
Please exchange to new glue sheet.
Then, press the Mosquito Catcher button for 3 sec.
No mosquitoes are collected on the
Glue Sheet.
• Aren’t windows or doors opened?
• Don’t you set up in the place where the wind blows such as air-
conditioner or fan?
⇒
Try to relocate the unit.
When the adhesive glue remains on
clothes, skin, fl oor, etc.
• Wipe with cooking oil, then wash with soap and water.
SLEEP lamp is fl ashing.
• Fan motor error. Turn the power OFF. Wait one minute, and
then turn the power ON.
SPECIFICATIONS
*1 The fan speed is automatically switched depending on the amount of impurities in the air.
*2 Size of a room which is appropriate for operating the unit at maximum fan speed.
• It indicates the space where a certain amount of dust particles can be removed in 30 minutes
(JEM1467).
*3 Size of a room in which approximately 7000 ions can be measured per cubic centimeter in the
centre of the room (at a height of approximately 1.2 meters from the fl oor) when the product is
placed next to a wall and run at the MED fan speed.
To Next Page
Loading...
Need help?
General
