E-10
You can set the DUST AND ODOUR /
PLASMACLUSTER SIGN to OFF when their SIGN is bright.
ON OFF
・
DUST AND ODOUR / PLASMACLUSTER SIGN go off .
It will darken the brightness of the following lamp.
CATCH Lamp / UV Light Lamp / GLUE SHEET Lamp / UV Light of the backside.
• When the unit restarts its operation, Light Control resumes its setting set before
turning off .
• At Sleep Mode, Light Control is available.
NOTE
When Plasmacluster Ion is ON, the PLASMACLUSTER SIGN will turn on. (blue)
(In operation)
ON OFF
more than 3 sec.
more than 3 sec. more than 3 sec.
USEFUL FUNCTIONS
LIGHT CONTROL
PLASMACLUSTER ION ON/OFF
more than 3 sec.
To Next Page
Loading...
