E-11
ENGLISH
ADJUSTMENT OF SENSOR DETECTION SENSITIVITY
Set to “Low” if the DUST AND ODOUR SIGN is constantly red to reduce sensitivity, and set to “High”
if the DUST AND ODOUR SIGN is constantly green to increase sensitivity.
• If the POWER ON/OFF button is not pressed within 8 seconds of adjusting sensor
sensitivity, the setting will be saved automatically.
• The sensor sensitivity setting will be saved even if the unit is unplugged.
NOTE
ON OFF
(with the unit OFF) (with the unit OFF)
If the , , lamps light up
for 10 seconds, the setting is completed.
(simultaneously for more than 3 sec.)
AUTO RESTART
If the unit is unplugged or there is a power failure, the unit will resume operation with the previous
settings after power is restored.
(simultaneously for more than 3 sec.)
High
Standard
Low
more than 3 sec.
Select the sensor
detection sensitivity.
(with the unit OFF)
1
2
3
To Next Page
Loading...
Need help?
General
