— 208 —
Report Programming
Use the following procedure for report programming:
Procedure
1.
In the SETTING window, select “12 REPORT.”
• The REPORT window will appear.
2.
Select any option from the following list:
1 0 SKIP: Zero skip
2 HOURLY REPORT: Hourly report
3 STACKED REPORT: Stacked report
The following illustration shows the report programming options.
1 0 SKIP See “Zero skip” on page 209.
2 HOURLY REPORT See “Hourly report” on page 209.
3 STACKED REPORT See “Stacked report” on page 210.
12 REPORT
To Next Page
Loading...
