— 243 —
Backup Data Receive Programming
Use the following procedure for backup data receive programming:
NOTE
For more information, please consult your authorized SHARP dealer.
Backup data receive
Your POS terminal can receive data from another device via RS232 which has previously received the data.
Procedure
Program the item as follows:
• SPEED (Use the selective entry method)
Select one of the following options (data transmission speeds):
PROGRAMMED: Receives data at a programmed speed.
38400bps: Receives data at 38400 bps.
19200bps: Receives data at 19200 bps.
9600bps: Receives data at 9600 bps.
4800bps: Receives data at 4800 bps.
2400bps: Receives data at 2400 bps.
CAUTION: The receiving unit must have equal or larger memories than the terminal sending the program.
To Next Page
Loading...
