— 271 —
Removing the journal paper roll (UP-820F)
1.
Remove the printer cover.
2.
Press the key to feed the journal paper until all its printed
part comes out.
3.
Cut the paper and remove the take-up spool.
4.
Cut the paper behind the printer and near the paper roll.
5.
Press the key until the paper remaining in the printer
comes out completely.
6.
Remove the paper roll from the back of the printer.
NOTE
Do not pull the paper through the printer.
7.
Remove the outer side of the take-up spool as shown on the
right.
8.
Remove the printed journal roll from the take-up spool.
Cut here
To Next Page
Loading...
