— 247 —
SD CARD Mode
In the SD CARD mode, you can save the data stored in your POS terminal into an SD card or load data from the
SA card for various purposes. The types of data available in this mode are as follows:
• Sales data
• Electronic journal data
• T-LOG data
• Programming data
• All RAM data
Use the following procedure for operation in the SD CARD mode.
Installing SD card
1.
Push the SD card slot cover part indicated by the arrow to open the
cover.
* To close the cover, push the arrowed part in until you hear it click.
2.
Insert the SD card into the slot.
* To remove the SD card, push it again, and it comes out of the slot.
1.
Select “7 SD CARD MODE” in the mode selection window.
2.
Select the desired type of operation.
Procedure
To Next Page
Loading...
