D
Danielle WhiteSep 2, 2025
How to turn off wi-ap display on Sharp VC-MH703HM VCR?
- AAnthony PattersonSep 2, 2025
Press the TIMER ON/OFF button to disengage the timer.

How to turn off wi-ap display on Sharp VC-MH703HM VCR?
Press the TIMER ON/OFF button to disengage the timer.
Why is my Sharp VC-MH703HM VCR playback not in stereo?
Ensure the VCR is connected to a stereo TV and SCART lead. The programme itself may not be broadcast in stereo.
What to do if auto installation is not complete on Sharp VCR?
Reset the VCR and complete AUTO INSTALLATION again. Refer to VCR Reset at the back of the book.
What to do if Sharp VC-MH703HM remote control not working?
Remote control may be too far from the main unit, ensure you are pointing the remote control at the VCR. The batteries may be flat, replace both. Ensure batteries have been inserted correctly. The VCR may be positioned in strong light.
Why is there no color on my Sharp VC-MH703HM VCR?
Make sure all the cables are connected properly and the VCR power cord is properly plugged in.
Why does my Sharp VC-MH703HM VCR show no picture?
Ensure the TV is set to the video channel and check all connecting cables.
What to do if no picture appears on my Sharp VCR?
Ensure the TV is set to the video channel and check all connecting cables.
| Type | VCR |
|---|---|
| Tape Type | VHS |
| Number of Heads | 4 |
| Tuner | Yes |
| Remote Control | Yes |
| Power Consumption | 18W |
| Playback Formats | VHS |
| Recording Formats | VHS |
| Dimensions | 360 x 95 x 290 mm |