Selecting the Language for
the On-screen Display
This camcorder allows you to choose from
among English, French or Spanish for the on-
screen display language.
Note:
• The operation procedures in the following
sections of this operation manual are based
on the use of on-screen displays in English.
MENU/DISPLAY button
Power switch
_ration button
Setting the Language
When using the camcorder for the first time,
select the desired language for the on-screen
display by performing the procedure below.
1 Press the LCD monitor OPEN release
button (_) and open the LCD monitor
(®).
®
LCD monitor
OPEN release
button
2
Hold down the Lock button
and set the Power switch to
CAMERA.
• The language selection screen
appears on the LCD screen.
Lock button
3
Press • or _-/ H (_) on the operation
button to select the desired language,
then press _ (_).
®l
SET[_ BUTTONI
@
Changing the Language
1 Set the camcorder toTAPE-CAMERA or
CARD-CAMERA mode.
2
3
Press the MENU/DISPLAY button until
the menu screen appears.
Select FTC,then press m,_ on the
Operation button. Select "LANGUAGE"
("LANGUE" or "IDIOMA") (_), then
press _ (_).
• The language selection screen appears.
@
4
5
I-
SET [4 BUTTON}
Perform step 3 in "Setting the
Language".
• The menu screen is displayed in the
language selected.
O
Press the MENU/DISPLAY button to
turn off the menu screen. 14
To Next Page
Loading...
