EasyManua.ls Logo

Sharp Viewcam VL-WD450U

Sharp Viewcam VL-WD450U
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advanced Features
Playback
Gamma Playback
The gamma playback function improves the
playback picture in TAPE-VCR mode by
increasing the brightness of the subject while
leaving the brighter portions of the image
unaffected.
GAMMA/BRIGHTER button
During playback in TAPE-VCR mode, press the
GAMMA/BRIGHTER button once.
"GAMMA1" appears, and the picture
becomes brighter.
Multiple Strobe Playback
The multiple strobe playback function can be
used to capture the action of a fast-moving
subject at intervals of 1/10 of a second using a
9- or 16-frame picture. This is useful when you
want to check your form in sports such as
tennis or golf.
2
In TAPE-VCR mode, press the MENU/
DISPLAY button until the menu screen
appears.
Select r_-7, then press _,_ on the
Operation button. Select "MULTI
FRAME" (_), then press _ (_).
m/
BRIGHII_R
To obtain a brighter picture, press the GAMMA/
BRIGHTER button again.
"GAMMA2" appears.
m/
BRIGH]]_R
To cancel Gamma Playback
Press the GAMMA/BRIGHTER button until
"GAMMA1" and "GAMMA2" disappear.
Note:
Gamma Playback has no effect during still
playback.
3 Press or _-/ li to select "9 FRAMES"
(9-frame picture) or "16 FRAMES" (16-
frame picture), then press _.
4
5
Press the MENU/DISPLAY button to
turn off the menu screen, and then
begin playback.
Press the STILL button at
the point where you want to
begin the multiple strobe
playback.
A multi-frame picture of the
image is displayed.
To cancel Multiple Strobe Playback
Pressthe STILL button again.
Note:
Multiple Strobe Playback cannot be used
during video search, still or slow playback.
61

Table of Contents

Related product manuals