Delete-protection
It is possible to prevent your important images
recorded on the SmartMedia card from being
accidentally erased.
2
In CARD-VCR mode, press the MENU/
DISPLAY button until the menu screen
appears.
Select _, then press _,_ on the
Operation button. Select "PROTECT"
(_), then press _,_ (_).
CARD
4 Press _-/ ii to set the protection.
• The _ indicator appears.
Delete-protection indicator
._TPROTECT 1/2
SET [& BUTTON] NORMAL
END [v BUTTON] 100-0004
5
• If you want to protect another image,
repeat steps 3 and 4.
Press •, then press the MENU/
DISPLAY button to turn off the menu
screen.
To cancel the protection setting
1 Select the image for which the protec-
tion setting is to be canceled in step 3
above.
_-IPROTECT 1/2
SET [& BUTTON] NORMAL
END [V BUTTON] 100-0006
_PROTECT 1/2
SET [& BUTTON] NORMAL
END [v BUTTON] 100-0004
3 Press the _ or _,_ to select the image
to be protected.
2 Press _-/ll to cancel the protection.
• The _ indicator disappears.
_PROTECT 1/2
SET [& BUTTON] NORMAL
END [v BUTTON] 100-0004
_PROTECT 1/2
SET [A BUTTON] NORMAL
END [v BUTTON] 100-0004
3 Press •, then press the MENU/
DISPLAY button to turn off the menu
screen.
Note:
• Formatting a SmartMedia card deletes all
images on it, including the ones with the delete-
protection setting.
80
To Next Page
Loading...
