EasyManua.ls Logo

Sharp Viewcam VL-WD450U

Sharp Viewcam VL-WD450U
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Recording in LP (Long Play
Recording) Mode
5
Press the MENU/DISPLAY button to
turn off the menu screen.
The recording mode indicator changes
from "SP" to "LP".
This camcorder allows you to record in LP
MENU/
(Long Play Recording) mode for approximately D_s_Y
50% more recording time with the same picture (_')
quality as that in SP (Standard Play Recording)
mode.
1 Set the camcorder toTAPE-CAMERA
mode.
2 Press the MENU/DISPLAY button until
the menu screen appears.
MENU/
DISPLAY
3 Select r_, then press _ on the
Operation button. Select "TAPE SPEED"
(_), then press _ (_z_).
Recording mode indicator
I_ 45min
To return to SP mode
Select "SP" in step 4 above.
Notes on the use of LP mode
To record in LP mode, be sure to use a Mini DV
cassette labeled for use with LP mode.
Frozen images, mosaic-pattern picture noise,
audio interruptions or audio loss may occur in
the following cases:
--When using a tape which is not designated
for use with LP mode.
--When a tape recorded in LP mode under
high-temperature conditions is played
back.
--When a tape recorded in LP mode with the
camcorder is played back on a Mini DV
player or camcorder from another manu-
facturer.
--When a tape recorded in LP mode is
played back on a Mini DV player or
camcorder without an LP function.
Audio dubbing is not possible with LP mode
recording.
4 Press or _- / i! to select "LP", then
press _.
30

Table of Contents

Related product manuals