Sharp ViewcamZ VL-Z3S User Manual

37
Useful Features
Quick Return
Available mode:
Tape Camera
If while playing back your tape you want to
quickly return to the last recorded scene
and start recording again, use the quick
return function.
1 Set the camcorder to Tape Camera
mode.
2 In Recording Standby mode, press
the DISPLAY button until the mode
screen appears.
3 Press l or m on the Operation
button to select “MENU”, then press
the centre of the Operation button.
4 Press l or m to select “EXECUTE”,
then press the centre of the Operation
button.
5 Press l or m to select T, then
press the centre of the Operation
button.
6 Press l or m to select “QK.
RETURN”, then press the centre of
the Operation button.
7 Press l or m to select “START”,
then press the centre of the Operation
button.
• “SEARCH” flashes, and the tape
begins fast forwarding or rewinding
to the end of the last recorded scene.
• When the tape reaches the end of
the last recorded scene, “FINISHED”
is displayed, and the camcorder
enters Recording Standby mode.
8 Press the DISPLAY button to turn off
the menu screen.
Notes:
• To cancel the quick return function while
“SEARCH” is flashing, press the centre of
Operation button twice.
• Quick return will not work if you remove the
cassette and reload it after recording or if
nothing has been recorded since loading.
SETT ING 1
QK.
DGTL
RE TURN
ZOOM
TAPE SPEED
RETURN
START
STOP
SEARCH

Sharp ViewcamZ VL-Z3S Specifications

General

Brand	Sharp
Model	ViewcamZ VL-Z3S
Category	Camcorder
Language	English