Digital Still Camera Features
Camera Recording
74
Digital Still Camera Features
Setting the File
Numbering Method
Available mode:
Card Camera
The camcorder automatically assigns file
numbers to captured images. You can
select two different methods of file number-
ing.
1 In Card Camera mode, press the
DISPLAY button until the mode
screen appears.
2 Select “MENU”, then “EXECUTE” by
using the Operation button (see page
32).
3 Press l or m to select Y, then
press the centre of the Operation
button.
4 Press l or m to select “FILE NO.”,
then press the centre of the Operation
button.
Types
SERIAL: Defines file numbers by
incrementing up from the last image
captured when inserting a new card.
RESET: Defines a new set of file
numbers when inserting a new card.
SETTING 1
SERIAL
REC MODE
RETURN
F I L E NO.
RESET
RESETFILE NO.
5 Press l or m to select “SERIAL” or
“RESET”, then press the centre of the
Operation button.
6 Press the DISPLAY button to turn off
the menu screen.
Note:
• When a warning indicator “MAXIMUM FILE
NUMBER” appears on the screen, set FILE
NO. menu item to “RESET”, then format the
card (see page 73) or replace the card with a
new one (see page 11).
To Next Page
Loading...
