Useful Features
Camera Recording
44
Useful Features
Windbreak
Available mode:
Tape Camera
The windbreak function allows you to
reduce annoying noise from strong winds
when recording.
1 In Tape Camera mode, press the
DISPLAY button until the mode
screen appears (see page 31).
2 Press l or m on the Operation
button to select “MENU”, then press
the centre of the Operation button.
3 Press l or m to select “EXECUTE”,
then press the centre of the Operation
button.
4 Press l or m to select Y, then
press the centre of the Operation
button.
5 Press l or m to select “WIND”, then
press the centre of the Operation
button.
6 Press l or m to select “ON”, then
press the centre of the Operation
button.
7 Press the DISPLAY button to turn off
the menu screen.
SETT ING 2
DIS
16 9:
AUD I O MODE
RETURN
W
IND
OFF
ON
ON
W
IND
To cancel Windbreak
Select “OFF” in step 6 above.
Note:
• Keep the windbreak function off during
normal recording. If left on, the recorded
audio may sound somewhat muffled when
played back.
To Next Page
Loading...
