Sharp VL-NZ50U - MiniDV Compact Digital Viewcam User Manual

34
Useful Features
Using the Remote
Control (Not supplied)
The remote control (RRMCG0084TASA) is not
supplied with this camcorder. Contact the
nearest SHARP service center or your dealer
for purchasing as a specified part.
Installing the Batteries
1 Open the battery compartment cover.
2 Insert the two commercially available AA
(R6 or UM/SUM-3) batteries with the
battery poles positioned as indicated.
3 Place the cover.
Activating
1 In VCR mode, press the MENU button
until the menu screen appears.
2 Press l or m on the operation button
to select I, then press the SET button.
3 Press l or m to select “REMOTE”,
then press the SET button.
4 Press l or m to select “ON”, then press
the SET button.
5 Press the MENU button to turn off the
menu screen.
Operating
Aim the remote control at the remote sensor of
the camcorder, and press the control buttons to
operate.
Notes:
• Do not use old and new batteries together or
batteries of different brands together.
• Be careful not to expose the remote sensor to
direct sunlight or strong interior lighting, as this
may prevent the remote control from operating
properly.
• Be sure that there are no obstacles between the
remote control and the remote sensor.
Useful Features
Playback
REMOTE
ON
ON
OFF
OTHERS
BEEP
REMOTE
T I ME CODE
TC OUT
RETURN
Remote sensor
Approximate operating
range of remote control
ZOOM buttons (W/T)
SLOW button
PLAY button
STOP button
PAUSE/STILL button
REW button
FF button
VOLUME +/L buttons
REC START/STOP button
1
2
(5 m)
16 ft
VL-NZ50U-034-036 02.2.12, 5:22 PM34

Sharp VL-NZ50U - MiniDV Compact Digital Viewcam Specifications

General

Brand	Sharp
Model	VL-NZ50U - MiniDV Compact Digital Viewcam
Category	Camcorder
Language	English