VL-PDl U
13. Remove the
Remove the
screws ((m)LX-BZ0214TAFF)(2 PCS.) and the screw ((c)LX-BZ0221TAFC)(one PC.).
assembii of LCD section.
(Disassembling the PWB unit)
14. Remove the shield sheet from the PWB unit, remove the camera FPC, remove the FPC from the remote control light
receiving unit, and remove H/A-FPC.
Shield
(Disassembling the battery terminal section)
15.
Remove the screw ((j)LX-HZOO5OTAFF)(one PC.) fixed to the t
remove the battery terminal.
Camera FPC
ripod angle, peel the double-coated adhesive tape,
and
Tripod angle
Double-coated adhesive tape
(Disassembling the V/F section)
16. RemovetheV/F PWB holder, remove theV/F backlight spacerfrom the V/F LCD panel, and remove the V/F LCD panel
from the V/F backlight unit.
V/F PWB holder
V/F backlight unit
I
V/F LCD panel
ht
44
I
To Next Page
Loading...
