9-2
VL-PD3S/H/E VL-PD3S/H/E
Accordingly, the repair engineer must obtain the new ID number.
If you have any question, please contact bolow.
ma_waki@toh.sharp.co.jp
3. Enter model number, serial number, company name and FAX, as well as your own name.
After confirmation, click OK .
For errors, click Cancel and enter correction.
Click Search and confirm your ID number (can be reactivated if number is forgotten).
<Enter> One character (English letter) per byte.
Model: Model name (leave cut hyphens, brackets)
Serial No: Manufaoturing number
Company/Fax. No.: Company name/Fax No. (multi fax or public line fax).
Name: Your name.
IEEE1394 Numbering
· A new ID number.
Please enter Model, Serial No., Company/Fax. No. and Name.
Model
Serial No.
Company/Fax. No.
Name
· Search ID number allocated to you.
4. For item 3 above, when you click OK . the ID number matching any address will appear.
Press that number and follow "Entering Procedures for IEEE1394 ID Numbers" as you enter the data for Viewcan.
IEEE1394 Numbering
Please use below Number.
182 181 180 17F 17E
01 00 00 00 14
5. If you need the ID number again, click More and use the same procedure.
Click End when you are finished.
4. With "FF" or "REW" the ID number (obtained through the Intranet) for any address wil appear. Set with "PLAY".
5. Press "STOP" and the address selection will appear. Then you can enter your ID number in order under the given
address digits (182, 181, 180, 17F, 17E).
6. Set the power switch to the "OFF" position. Now the writing is complete.
■ Procedures for Entering IEEE1394 Numbers
1. Set the power switch to the "VCR" position.
2. Press "CONTINUE" on the adjustment remote control,
then press "VCR ADJ" and the address you chose will
appear on the LCD monitor.
3. With "FF" or "REW" the desired address will appear.
Set with "PLAY" and data entry will show.
VCR ADJ
0000
FFFF6A00
Address: flashing
VCR ADJ
017E
FFFF6A00
40
Data(ID number)
[PLAY] key
[FF] key
[STOP] key
[REW] key
[VCR ADJ] key
[CONTINUE] key
ADJ. REMOTE CONTROL
RRMCG 0033 TASA
OK
Cancel
Search
More
Search
End