9-16
VL-PD3S/H/E VL-PD3S/H/E
2) Shifting to the normal operation mode
Set the data for the address "00B0" to " FF".
]
This shifts the mode to the normal operation mode.
]
Press the "CONTINUE" key, and the "CAM ADJ" display goes out of the screen, enabling the normal operation.
(5)Camera unit adjustment procedure
2. Iris basic adjustment
1. Auto focus adjustment
6. Color gain coarse adjustment
7. White balance adjustment
8. Color gain adjustment
9. Auto white balance adjustment
3. Black balance adjustment/A/F noise adjustment
4. Iris AE adjustment
5. White balance coarse adjustment
* The above 1. Auto-focus function adjustment and 2. Iris basic adjustment are performed in the auto-focus function adjustment
mode, whereas the other adjustments are made in the camera signal system adjustment mode.
* After completing the auto-focus adjustment mode, set the camera signal system adjustment mode. (Take care that the adjustment
mode transfer address is different.)
To Next Page
Loading...
