Sharp VL Z 1 H User Manual

Useful Features
33
Quick Return
If while playing back your tape you want to
quickly return to the last recorded scene
and start recording again, use the quick
return function.
1 In Recording Standby mode, press
the DISPLAY button until the mode
screen appears.
2 Press l or m on the Operation
button to select “MENU”, then press
the centre of the Operation button.
3 Press l or m to select “EXECUTE”,
then press the centre of the Operation
button.
4 Press l or m to select T, then
press the centre of the Operation
button.
5 Press l or m to select “QK.
RETURN”, then press the centre of
the Operation button.
6 Press l or m to select “START”,
then press the centre of the Operation
button.
• “SEARCH” flashes, and the tape
begins fast forwarding or rewinding
to the end of the last recorded scene.
• When the tape reaches the end of
the last recorded scene, “FINISHED”
is displayed, and the camcorder
enters Recording Standby mode.
7 Press the DISPLAY button to turn off
the menu screen.
Notes:
• To cancel the quick return function while
“SEARCH” is flashing, press the centre of
Operation button twice.
• Quick return will not work if you remove the
cassette and reload it after recording or if
nothing has been recorded since loading.
SETT ING 1
QK.
DGTL
RE TURN
ZOOM
TAPE SPEED
RETURN
START
STOP
SEARCH

Sharp VL Z 1 H Specifications

General

Brand	Sharp
Model	VL Z 1 H
Category	Camcorder
Language	English