Sharp VL Z 1 H

Appendix
Appendix
62
Turning off the
Confirmation Sound
A confirmation sound is made when you
turn on or off the Power switch, press the
Start/Stop button, or perform other
designated operations. Use the procedure
below to turn off the confirmation sounds.
• The example screens shown are for Camera
mode.
1 Press the DISPLAY button until the
mode screen appears.
2 Press l or m on the Operation
button to select “MENU”, then press
the centre of the Operation button.
3 Press l or m to select “EXECUTE”,
then press the centre of the Operation
button.
4 Press l or m to select Z, then
press the centre of the Operation
button.
5 Press l or m to select “BEEP”, then
press the centre of the Operation
button.
OTHERS 1
BEEP
REMOTE
DEFAULT
RETURN
ON
OFF
DEMO MODE
OFFBEEP
6 Press l or m to select “OFF”, then
press the centre of the Operation
button.
7 Press the DISPLAY button to turn off
the menu screen.